Connecting the coolant hose of the low-temperature coolant circuit

• Check the sealing rings (1) of the coolant lines (2) for damage and replace them if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect the coolant line (1) and lock audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Install RESONATOR .
• Fill the LOW-TEMPERATURE COOLING SYSTEM with the vacuum fill equipment.
• Vent the LOW-TEMPERATURE COOLING SYSTEM .
• Check LOW-TEMPERATURE COOLING SYSTEM  for water tightness.
• Install the center UNDERBODY PROTECTION .
• Install the front UNDERBODY PROTECTION .