Installing the rear brake pad wear sensor

• Install the brake pad wear sensor (2) in the direction of arrow in the brake pad and ensure its correct fit.
• Hook the cable of the brake pad wear sensor (2) in the holder (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Hook the cable of the brake pad wear sensor to the holders (1).
• Connect connectors (2) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert removed nuts (2) and tighten.

TIGHTENING TORQUES SPECIFICATION

Wheel arch cover
screw	tightening torque	3 Nm
Plastic nut	tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.