Fasten electric coolant pump and coolant hoses to the front axle support (M40i 6-cyl.)

Fasten holder (1) to the right hand side of the front axle support (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Fasten coolant hose (1) on the brackets (2) on the front axle support.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the holder for the electric coolant pump (2) on the front axle support.

Tighten the screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUES SPECIFICATION

Holder to front axle support
M6 Replace screw.	tightening torque 8 Nm