Installing fuel delivery line

Tighten union nut (1).

TIGHTENING TORQUES SPECIFICATION

Fuel delivery line to high pressure pump
M14	Tightening torque	26 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Slide in and lock the fuel supply line in the direction of the arrow in the snap fastener (2).
The fuel supply line must be audibly engage in the snap fastener (2).
Secure clamps (1).

Tighten down screw (3).

TIGHTENING TORQUES SPECIFICATION

Fuel line to cylinder head cover
6x18	Tightening torque	7 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Insert and install the tank vent line (2).
Lock (1) must engage audibly.
Secure the tank vent line (2) to the clamp (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Feed in and install the wiring harness section (2) for the injectors and ignition coils.
Secure clamps (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Feed in and install the wiring harness section (1) for the injectors and ignition coils.
The locking mechanisms (arrows) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work