Installing fuel delivery line

• Guide the fuel delivery line (3) in and install.
• Install rubber damper (2).
• Check the rubber damper (2) for the correct fit.
• Tighten the union nut (1) hand-tight.
• Tighten union nut (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Fuel delivery line to high pressure pump
  M14	Tightening torque	26 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Slide in and lock the fuel supply line in the direction of the arrow in the snap fastener (2).

  The fuel supply line must be audibly engage in the snap fastener (2).

• Secure the clamp (1).
• Tighten down screw (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Install the IGNITION COILS .
• Install rear ACOUSTIC COVER .
• Install the upper part COWL .
• Install windshield panel COVER .
• Install the rear right engine compartment COVER .
• Install the of the rear left engine compartment COVER .
• Install left and right WIPER ARM .
• Install the front hood rear SEAL .
• Install ACOUSTIC COVER .
• Reconnect all battery GROUND LEADS