LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2021
>>
X3 sDrive30i
>>
Repair and Diagnosis
>>
Brakes
>>
Mechanical - Hydraulic
>>
Brakes -- Repair (G01)
>>
34 51 Mechanical-Hydraulic Components
>>
34 51 601 Replacing hydraulic unit (after vehicle diagnosis) (without programing/encoding) (X3)
>>
Remount hydraulic unit holder
Remount hydraulic unit holder
Release screws (1) and remove the holder (2).
Courtesy of BMW OF NORTH AMERICA, INC.
Install holder (2).
Insert screws (1) and tighten them.
TIGHTENING TORQUES SPECIFICATION
Hydraulic control unit to holder
M6 Replace screws.
Tightening torque
8 Nm
Courtesy of BMW OF NORTH AMERICA, INC.
Courtesy of BMW OF NORTH AMERICA, INC.