Install Brake Guard Plate, Front

• Install brake guard plate (2).
• Replace screws (1).

  Parts:  Screws

• Insert screws (1) and tighten.
  TIGHTENING TORQUES SPECIFICATION
  
  

  Brake guard plate at front swivel bearing
  M6x12 Replace screw.	Tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Install the front BRAKE DISCS .
• Mount the front CALIPER CARRIER .
• Grease the brake pads, brake anchor plate and brake caliper using brake PAD PASTE .
• Install front BRAKE PADS .
• Install the front brake pad WEAR SENSOR .
• Install the front left and right WHEELS .
• COMMISSION/BED (BREAK) IN new brake pads and brake discs.