Installing the tailgate lock
- Position tailgate lock (4).
- Tighten down screws (3).
TIGHTENING TORQUES SPECIFICATION
| Tailgate lock | ||
|---|---|---|
| M8x20 screw | Tightening torque | 19 Nm |
- Connect connector (2).
- Attach the Bowden cable (1).
Follow-up work
- Install loading EDGE TRIM .
- Install both bottom d-pillar TRIM PANELS .
- Install the WARNING TRIANGLE .
- Install both flaps in the luggage compartment TRIM PANEL .
- Install luggage compartment FLOOR COVERING .