Detaching and lowering the front axle support
Disassemble the front axle support
WARNING:
Heavy component falling down or tipping.
Danger! Immobilization period-threatening injuries!
Danger! Immobilization period-threatening injuries!
- Before lowering or removing the front axle: Secure the engine in the installation position.
- For additional information see: 11 00 670 Securing engine in INSTALLATION POSITION .
Partially releasing left and right crash levers
NOTE:
The following step(s) must be performed if the listed component(s) is/are installed.
NOTE:
Perform the steps on the right and left side.
- Release nut (1).
- Remove the bolt (2).
- Releasing the adapter for the front axle support from the front axle support on the right and left
NOTE:
Perform the steps on the right and left side.
- Loosen screws (1).
- Loosen screws (1) to (3).
Lower front axle support
- Lower the front axle support (1) with the universal jack by dimension (A).
Dimension (A) = maximum of 15 cm -