Install resonator
- Make sure that the holder (6) is not damaged when installing the resonator (4).
- Insert the resonator (4) into rubber mount (5) and install.
The resonator (4) must engage audibly in the rubber mount (5).
- Tighten down screw (2).TIGHTENING TORQUES SPECIFICATION
Resonator to intake filter housing Screw Tightening torque 2.8 Nm - Tighten clamp (3).TIGHTENING TORQUES SPECIFICATION
Resonator to clean air pipe cl. Tightening torque 3 Nm - Secure the clamp (1).