Install head unit

• Connect and lock the connector (3) to the head unit (4).
• Position the cable bracket (2) correctly and engage it in the detent (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: RISK OF DAMAGE 
  Damage to the instrument cluster (KOMBI) or the head unit
  A ground offset can occur when releasing and connecting the cables. This can generate currents that render the instrument cluster (KOMBI) or the head unit unusable.

  • When releasing: First release the APIX data cable (blue).
  • When connecting: Connect the APIX data cable (blue) last.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock all the connectors in the marked area with the head unit (1) in correct assembly sequence.

  All cables must be routed correctly.

• Feed in the head unit (2).
• Tighten down screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING RADIO OPERATING UNIT AND AIR CONDITIONING CONTROL PANEL .
• Refer to INSTALLING DECORATIVE STRIP ON CENTER OF DASHBOARD .
• Refer to DISCONNECTING THE NEGATIVE BATTERY CABLE OF THE SYSTEM BATTERY .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .