Removing the light operating unit
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
- Protect the working area around the light operating unit (1) with adhesive tape.
- Unclip the light operating unit (1) at the marked positions with the special tool 0 496 569 (00 9 325) .
- Remove the light operating unit (1) in the direction of the arrow.
- Unlock the connector (1) on the light operating unit (2) and disconnect it.