Install the actuator on the left hood hinge

• Feed in the actuator (1) at the guide pin (2) and slide to the back in arrow direction up to the stop.
• Replace the screw (3).

  Parts:  Screw

• Tighten down screw (3).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Actuator to engine compartment lid hinge
  M6x12 Replace screw.	Tightening torque	8 Nm

• Connect connectors (4) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING WINDSHIELD PANEL COVER .
• Refer to INSTALLING LEFT AND RIGHT WIPER ARM .
• Refer to INSTALLING THE COVER OF THE ENGINE COMPARTMENT ON THE REAR LEFT .
• Refer to INSTALLING THE REAR RIGHT ENGINE COMPARTMENT COVER .
• Refer to CONNECTING NEGATIVE BATTERY CABLE OF THE SYSTEM BATTERY .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .