51 71 Gaskets And Loose Body Parts (X3 M)
51 71 TIGHTENING TORQUE OVERVIEW
| Bulkhead lower part | ||
| Hexagon screw | Tightening torque | 3 Nm |
| Plastic nut | Tightening torque | 2.6 Nm |
| Center thrust field on the thrust arm | ||
| Hexagon screw | tightening torque | 35 Nm |
| Cowl upper part | ||
| Hexagon screw | Tightening torque | 3 Nm |
| REAR SPOILER | ||
| Oval-head screw | tightening torque | 4.0 Nm |
| Rear spoiler, lower part | ||
| Oval-head screw | Tightening torque | 8.0 Nm |
| Side sill trim panel | ||
| screw | Tightening torque | 3 Nm |
| Plastic nut | Tightening torque | 2.6 Nm |
| Strut brace to bracket | ||
| Hexagon nut | tightening torque | 30 Nm |
| Tension strut on bulkhead | ||
| M10x25 screw Replace screw. |
Joining torque | 56 Nm |
| Angle of rotation | 90° | |
| Tension strut to shock tower | ||
| Torx bolt Replace screw. |
Joining torque | 56 Nm |
| Angle of rotation | 90° | |
| Wheel arch cover (nuts) | ||
| Plastic nut | Tightening torque | 2.6 Nm |
| Wheel arch cover (screws) | ||
| Thermoplastic hexagon screw | Tightening torque | 3 Nm |