Partially installing the air conditioning condenser

• Check rubber mount (2) for damage and, if necessary, replace it.
• Guide the lower guide pin (1) on the air conditioning condenser correctly into rubber mount (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the air-conditioning condenser (2) correctly.
• Tighten nut (1) on air conditioning condenser (2).

TIGHTENING TORQUE SPECIFICATIONS

Air conditioning condenser holder on body
Nut M6	Tightening torque	8 Nm
M6 screw	Tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

• Position coolant lines (3) correctly.
• Clip in holder (1) laterally on air conditioning condenser (2).

Courtesy of BMW OF NORTH AMERICA, INC.