Install left and right wiper arm

NOTE: Description is for left component only. Procedure on the right side is identical.

NOTE: TECHNICAL INFORMATION
The window wiper system must be in the zero position.
After installing the cowl cover and before installing the wiper arms:
Operate the window wiper system one time, to ensure the window wiper system has the correct installation position.

Insert the wiper arms (3) .
Correctly position the wiper arm (2) in relation to the window edge (1) .

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Description is for left component only. Procedure on the right side is identical.

Tighten nut (2) .

TIGHTENING TORQUE SPECIFICATIONS

Windshield wiper arm
Combination hexagon nut	tightening torque	35 Nm

Connect the protective cap (1) .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE WIPER BLADE .