Installing the pedestrian protection sensor

• Check impact absorber (2) for damage and replace if necessary.
• Carefully insert the pedestrian protection sensor (1) into the impact absorber (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.
• Attach the impact absorber (2) at the bottom and then press on the top.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING BUMPER COVER, FRONT .
• Refer to PARTIALLY INSTALLING THE FRONT SECTIONS OF BOTH WHEEL ARCH COVERS AT THE FRONT .
• Refer to PARTIALLY INSTALLING BOTH FRONT WHEEL ARCH TRIMS .
• Refer to INSTALLING FRONT ORNAMENTAL GRILLE .
• Refer to DISCONNECTING THE NEGATIVE BATTERY CABLE OF THE SYSTEM BATTERY .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .