Install the mid-range speakers in the instrument panel
- Connect the connector below it to the mid-range speaker (2) .
- Position the mid-range speaker (2) in the instrument panel (3) .
- Tighten the screws (1)
.TIGHTENING TORQUE SPECIFICATIONS
Loudspeaker to support/support to dashboard/support to body screw Tightening torque 1.8 Nm - Check the latch mechanisms on the speaker cover (1)
for damage and replace them if necessary.
The latch mechanisms must not be missing or faulty.
- Engage the speaker cover (1)
correctly into the instrument panel (2)
.