Remove washer fluid reservoir
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING ALL WHEELS .
- Refer to PARTIALLY REMOVING THE FRONT WHEEL ARCH COVER .
- Loosen expanding rivet (1) .
- Loosen screw (2) .
- Remove the cover (3)
.
- Loosen nut (1) .
- Unlock and remove connecting piece (2)
.
- Unlock and disconnect the connector (1) on the washer fluid level switch.
- Unlock and disconnect the connector (2) on the window washer pump.
- Unlock and disconnect the hose pipes (3) from the windscreen washer pump.
- Catch the escaping washer fluid.
- Unclip hose pipe (4)
on the washer fluid reservoir for the window washer system.
- Unclip and remove washer fluid reservoir (1) from fixture (2) .
- Feed out holder of washer fluid reservoir (3) from threaded bolt.
- Feed out and remove washer fluid reservoir (1)
in direction of arrow.