Install console for windshield wiper system complete with motor

• Insert console for windshield wiper system (4).
• Tighten down screws (3).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Wiper console to body
  M6x30	tightening torque	10 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten nut (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Wiper console on angle bracket
  M6	tightening torque	10 Nm

• Connect plug (2).

Follow-up work 

• Refer to INSTALLING THE REAR COWL PANEL .
• Refer to INSTALLING LEFT AND RIGHT WIPER ARM .
• Refer to INSTALLING FRONT WINDSHIELD PANEL COVER .
• Refer to INSTALLING THE GUTTER STRIP ON THE WINDSCREEN ON THE LEFT AND RIGHT .
• Refer to INSTALLING THE REAR HOOD SEAL .