Install the heat shield on the exhaust turbocharger, top

• Fit and install the heat shield (1)  on the exhaust turbo charger, top.
• Make sure that the heat shield (1)  is correctly positioned (2)  on the heat shield.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1)  on the heat shield (2)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Heat shield to console/heat shield
  M6	tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in and install the heat shield (2)  .
• Tighten down screw (1)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Heat shield to console/heat shield
  M6	tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Heat shield to console/heat shield
  M6	tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Fit and secure the coolant line (2)  to the holder (3)  .
• Tighten down screw (1)  .

TIGHTENING TORQUE SPECIFICATIONS

Coolant line to cylinder head
M6	Tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.