1362 SENSOR FOR CONTROL UNIT (X2 xDrive 28i 2018-2023, X2 xDrive 28i 2018-2023)
1362 TIGHTENING TORQUE OVERVIEW
| Boost pressure sensor to intake plenum | ||
| Torx screw 6x20 | Tightening torque | 5 Nm |
| Hexagon bolt 6x20 | Tightening torque | 8 Nm |
| Boost pressure sensor to throttle body | ||
| TS5x20 | Tightening torque | 5 Nm |
| Coolant temperature sensor at cylinder head | ||
| Sensor | Tightening torque | 18 Nm |
| Crankshaft sensor to timing case cover | ||
| Tightening torque | 4.6 Nm | |
| Differential pressure sensor to holder | ||
| screw | Tightening torque | 4 Nm |
| Hot film air-mass meter to intake filter housing | ||
| TS4x16 | Tightening torque | 1.5 Nm |
| Temperature sensor on the crankcase | ||
| M6x18 | Tightening torque | 8 Nm |