1151 WATER PUMP (X2 M35i 2019-2022)
1151 TIGHTENING TORQUE OVERVIEW
| Auxiliary coolant pump holder to cylinder head | ||
| M6 | Tightening torque | 8 Nm |
| Belt pulley to coolant pump | ||
| M8X20 Observe Tightening sequence! Replace screws. |
1. Tightening torque | 28 Nm |
| 2. Angle of rotation | 90° | |
| Belt pulley to coolant pump | ||
| M6 Replace screws. |
Tightening torque | 8 Nm |
| Component carrier to crankcase | ||
| M8 x 35 | Tightening torque | 19 Nm |
| Coolant pump to component carrier | ||
| M6x20 | Tightening torque | 10 Nm |
| Electric coolant pump to holder | ||
| M6 | Tightening torque | 8 Nm |
| Holder of auxiliary coolant pump to console | ||
| M6 nut | Tightening torque | 9 Nm |
| Holder to auxiliary coolant pump | ||
| M6x25 screw | Tightening torque | 5 Nm |