Remounting the EMF actuator

Release screws (1) and remove the EMF actuator (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Carefully put on the EMF actuator until the gearing snaps in and the EMF actuator is flush with the brake caliper.
If necessary, turn the EMF actuator slightly until the hole and the screw thread are aligned.

Courtesy of BMW OF NORTH AMERICA, INC.
Replace screws 1.
Parts: Screws
Position and tighten the screws (1) at the EMF actuator (2).

TIGHTENING TORQUE SPECIFICATIONS

EMF actuator to brake caliper
Replace screws.	Tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.