Install the auxiliary stop lamp

• Connect the hose line (3) and position the (2)  auxiliary brake light.
• Tighten the screws (1)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Auxiliary stop lamp to trunk lid
  Sheet metal screw 4.8x16	Tightening torque	2 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock the connector (1)  with the auxiliary brake light (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to ATTACHING REAR SPOILER .
• Refer to INSTALLING THE TRIM FOR THE TOP REAR WINDOW FRAME .