Install the seal mount for the right-hand front flap
NOTE:
Description is for left component only. Procedure on the right side is identical.
Installing seal fixture for hood
- Position mounting (3) of the hood seal.
- Secure expanding rivet (2).
- Tighten down screw (1).TIGHTENING TORQUE SPECIFICATIONS
Fixture for hood seal to second rear firewall upper part Thermoplastic hexagon screw Tightening torque 2.6 Nm
Follow-up work
- Refer to INSTALLING FRONT WINDSHIELD PANEL COVER .
- Refer to INSTALLING THE REAR HOOD SEAL .