Install the bottom cross connection
- Guide in cross connection (3) and install.
- Guide in locks (2) and install.
- Lock the locking pins (1).
- Ensure that the locking pins (1) audibly engage.
- Tighten the bolts (2) at the front left.TIGHTENING TORQUE SPECIFICATIONS
Deformation element to front axle support adapter screw Tightening torque 11.8 Nm - Replace the blind rivet (1).
Parts: Blind rivet
- Mount the blind rivet (1) with blind rivet pliers.
- Tighten the bolts (2) at the front right.TIGHTENING TORQUE SPECIFICATIONS
Deformation element to front axle support adapter screw Tightening torque 11.8 Nm - Replace the blind rivet (1).
Parts: Blind rivet
- Mount the blind rivet (1) with blind rivet pliers.