Install oil level sensor for engine oil

Prepare the oil-level sensor 

• Replace sealing ring (1).

  Parts:  Sealing ring

Courtesy of BMW OF NORTH AMERICA, INC.

• Clean sealing surface on oil sump.
• Insert and install the oil-level sensor (3).
• Tighten nuts (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Oil level sensor to oil sump
  M6	Joining torque	2 Nm
  	Tightening torque	8 Nm

• Connect and lock the connector (1).

  The connector (1) must lock audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to TIGHTENING THE OIL DRAIN PLUG .
• Refer to INSTALLING THE FRONT UNDERBODY PROTECTION .
• Refer to TOPPING UP THE MOTOR OIL .
• Refer to INSTALLING THE OIL FILLER CAP .
• Refer to CHECKING ENGINE OIL LEVEL .