Installing the oil pressure switch
- Guide in and install oil pressure switch (2).
- Tighten oil pressure switch (2).TIGHTENING TORQUE SPECIFICATIONS
Oil pressure switch to crankcase Sensor tightening torque 165 Nm - Connect connectors (1) and lock.
- Make sure the connector (1) engages audibly.
Follow-up work
- Refer to INSTALLING FAN COWL WITH ELECTRIC FAN .
- Refer to INSTALLING FRONT CROSS CONNECTION .
- Refer to INSTALLING INTAKE SILENCER HOUSING .
- Refer to INSTALLING THE INTAKE MANIFOLD FOR THE INTAKE FILTER HOUSING .
- Refer to CHECKING ENGINE OIL LEVEL .