Install the guide for the rear bumper panel

• Install the guide (3).
• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Guide for the bumper panel to body
  Screw	Tightening torque	4.6 Nm
  Nut	Tightening torque	4.6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten nuts (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Guide for the bumper panel to body
  Screw	Tightening torque	4.6 Nm
  Nut	Tightening torque	4.6 Nm

Follow-up work 

• Refer to INSTALLING REAR BUMPER PANEL .
• Refer to INSTALLING BOTH TAIL LIGHTS ON THE SIDE PANEL .
• Refer to INSTALLING BOTH TRIM PANELS FOR THE WATER GUTTER .