5171 Gaskets And Loose Body Parts
5171 TIGHTENING TORQUE OVERVIEW
| Air duct to deformation element | ||
| M6x20 screw | Tightening torque | 4.6 Nm |
| Air duct to deformation element, bottom | ||
| M6x20 screw Replace screws | tightening torque | 8 Nm |
| Air duct to deformation element/cross connection | ||
| M6x20 screw | Tightening torque | 6 Nm |
| Brake air duct to bracket | ||
| Screw | Tightening torque | 4 Nm |
| Firewall lower part on body | ||
| Nut | tightening torque | 2.6 Nm |
| Screw | tightening torque | 2.6 Nm |
| Cover on body | ||
| Hexagon screw | Tightening torque | 3 Nm |
| Cowl cover, top | ||
| screw | Tightening torque | 2.6 Nm |
| Cross-brace to bulkhead | ||
| M10 Replace nut. | tightening torque | 56 Nm |
| Angle of rotation | 45° | |
| Fixture for hood seal to second rear bulkhead upper part | ||
| Thermoplastic hexagon screw | Tightening torque | 2.6 Nm |
| Front wheel arch cover to front bumper panel | ||
| Hexagon screw for thermoplastic plastic | Tightening torque | 2.6 Nm |
| Lower section of rear spoiler to lateral tailgate | ||
| Oval-head screw | Tightening torque | 2.6 Nm |
| Lower section of rear spoiler to tailgate | ||
| Fillister head bolt | Tightening torque | 8 Nm |
| Rear bulkhead to cowl lower part | ||
| Oval-head screw | Tightening torque | 5 Nm |
| Rear spoiler to trunk lid | ||
| Oval-head screw | Tightening torque | 3.1 Nm |
| Strut brace to support bearing | ||
| M10 Replace screw. | tightening torque | 56 Nm |
| Angle of rotation | 90° | |
| Wheel arch cover to body | ||
| Plastic nut | Tightening torque | 2.6 Nm |
| Screw | Tightening torque | 2.6 Nm |