5111 Bumper, Front
5111 TIGHTENING TORQUE OVERVIEW
| Air duct to cross connection | ||
| M6x20 screw | Tightening torque | 11.8 Nm |
| Bottom deformation element to adapter plate for front axle support | ||
| Screw | tightening torque | 11.8 Nm |
| Bracing strut to top front bumper support or to top connection | ||
| M6x20 screw | Tightening torque | 11.8 Nm |
| Bumper panel to air duct | ||
| Screw M6 | Tightening torque | 4.6 Nm |
| Bumper panel to headlamp | ||
| Thermoplastic multi-purpose bolt | Tightening torque | 2.5 Nm |
| Deformation element to engine mount | ||
| Hexagon screw Replace screws. | Tightening torque | 100 Nm |
| Angle of rotation | 180° | |
| Deformation element to front axle support adapter | ||
| screw | Tightening torque | 11.8 Nm |
| Fanfare horn to top front bumper support | ||
| Hexagon screw | Tightening torque | 11.8 Nm |
| Front bumper panel to fender | ||
| Screw TS5X35 | Tightening torque | 3 Nm |
| Front bumper panel to undershield | ||
| Thermoplastic hexagon screw | Tightening torque | 2.5 Nm |
| Holder on bumper support | ||
| Thermoplastic bolt | Tightening torque | 4.5 Nm |
| Support for front bottom bumper cover to deformation element | ||
| M6x30 screw | tightening torque | 8 Nm |
| Support lock to deformation element | ||
| M6x20 screw | Tightening torque | 11.8 Nm |
| Top front bumper support to top deformation element | ||
| Hexagon screw M8x95 | Tightening torque | 28 Nm |
| Vertical strut to deformation element | ||
| Flat-head screw M6x20 | Tightening torque | 11.8 Nm |
| Hexagon screw | Tightening torque | 11.8 Nm |
| Washer fluid reservoir holder to adapter plate of front axle support | ||
| Screw | tightening torque | 10 Nm |