Install the trim panel for the luggage compartment capping

• Install the trim panel (3)  of the luggage compartment capping and insert the end fitting.
• Clip the trim panel (3)  of the luggage compartment capping in the clips (4)  .
• Tighten screw and mount cover (2)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Trim panel of luggage compartment capping
  Self-tapping screw	Tightening torque	4 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Trim panel of luggage compartment capping to body
  Hexagon screw	Tightening torque	1.8 Nm

Follow-up work 

• Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL AT LEFT .
• Refer to INSTALLING THE BOTTOM C-PILLAR TRIM PANEL .
• Refer to INSTALLING THE REAR DOOR SILL COVER STRIP .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .
• Refer to INSTALLING HOOK AND LOOP TAPE FOR THE VEHICLE TOOL KIT .
• Refer to INSTALLING TOOLKITS .
• Refer to INSTALLING THE EMERGENCY WHEEL .
• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT REMOVABLE PANEL .