Installing the A-pillar trim panel

WARNING: Airbag unit.
Danger! Immobilization period-threatening injuries!

Before performing any work on the airbag, always disconnect the battery ground lead from the battery.
Airbag unit may only be set down with the cushion (airbag itself) facing upwards.
For additional information see: SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .

WARNING: Pyrotechnic components.
Danger! Immobilization period-threatening injuries!

All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
Replace any damaged part or ones that have been dropped.
For additional information see: SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .

NOTE: TECHNICAL INFORMATION
Detents, guides and mounting elements must not be damaged or missing.

Tighten down screw,

TIGHTENING TORQUE SPECIFICATIONS

A-pillar trim panel to body
M5x42 screw Replace screw	Tightening torque	2.2 Nm

Courtesy of BMW OF NORTH AMERICA, INC.