Installing side trim panel in the footwell at A-pillar

• Position the side trim panel (2) and clip it to the clips (3).
• Make sure the edge protection on the side trim panel (2) fits correctly.
• Tighten down screw (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Side trim panel bottom left to holder
  Screw	Tightening torque	3 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install lever for the hood release (2) l.
• Tighten down screw (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Lever for hood release to the holder
  Screw	Tightening torque	3 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE FRONT DOOR SILL COVER STRIP .