3355 Anti-Roll Bar
33 55 ANTI-ROLL BAR - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Anti-roll bar link to anti-roll bar | F39/F45/F46/F48/F49/F52 | M10 | Replace nut. | 56 Nm |
| 2AZ Anti-roll bar link to trailing arm | F39/F45/F46/F48/F49/F52 | M8 | 28 Nm | |
| 3AZ Retaining bracket, anti-roll bar to rear axle support | F39/F45/F46/F48/F49/F52 | M8 | 28 Nm |
3355 TIGHTENING TORQUE OVERVIEW
| Upper wishbone to trailing arm | ||
| M12 Replace screw and nut. | Tightening torque | 100 Nm |
| Tighten in normal position. | ||
| Tightening via nut. | ||