3341 Wheel Bearings
33 41 WHEEL BEARINGS - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Wheel bearing to trailing arm | F39/F45/F46/F48/F49/F52 | M12 | Joining torque and angle of rotation must be observed without fail. Replace screws. Tightening torque Angle of rotation |
100 Nm 90° |
| 2AZ Wheel bearing (hub) on output shaft | F39AWD/F45AWD/F46AWD/F48AWD/F49AWD | M16 | Joining torque and angle of rotation must be observed without fail. Replace screw. Tightening torque Angle of rotation |
50 Nm 155° |