Install rear window wiper motor

• Check the rubber grommet (4)  for damage.
• Join the rear wiper motor (3)  in the grommet (4)  .
• Tighten down screws (2)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Wiper motor at the trunk lid
  screw	Tightening torque	7.6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connector (1)  .

Follow-up work 

• Refer to INSTALLING THE TAILGATE TRIM PANEL .
• Refer to MOUNTING BOTH TRIM PIECES FOR THE REAR WINDOW FRAME ON THE SIDE .
• Refer to INSTALLING THE TRIM FOR THE TOP REAR WINDOW FRAME .