Remove the console for the windshield wiper system complete with engine

Preliminary work 

• Refer to REMOVING REAR HOOD SEAL .
• Refer to REMOVING THE GUTTER STRIP ON THE WINDSCREEN ON THE LEFT AND RIGHT .
• Refer to REMOVING FRONT WINDSHIELD PANEL COVER .
• Refer to REMOVING LEFT AND RIGHT WIPER ARM .
• Refer to REMOVING THE REAR COWL PANEL .

• Loosen nut (1).
• Loosen screws (3).
• Unlock the connector (2) and disconnect (see next illustration).
• Remove the console for the windshield wiper system (4).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Press the lock on the lower section of connector and disconnect the connector.

  Courtesy of BMW OF NORTH AMERICA, INC.