Installing the engine on the assembly jig

CAUTION: Heavy component  .
Heavy components can lead to injury or damage  .

• Remove and install heavy components with the aid of another person/other persons.

• Loosen screws (1)  .
• Guide out and remove holder (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the special tool 2 455 010  on the engine (1)  .
• Position the standard screws (arrows).
• Tighten standard bolts (arrows).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Special tool 2 455 010 to crankcase
  M10x30	Tightening torque	38 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the assembly jig 0 495 187 (00 2 300) with the special tool 0 495 196 (00 2 320)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (arrows).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Special tool 00 2 320 to special tool 00 2 300
  M14X95	Tightening torque	130 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Screw the special tool 2 413 082 to the 0 495 196 (00 2 320) special tool  .
• Tighten the screws (arrows).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Special tool 2 413 082 to special tool 00 2 320
  M12x65	Tightening torque	100 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the workshop crane with the special tool 0 490 579 (11 0 070) and the engine on the special tool 0 495 187 (00 2 300) .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Detach the holder (2)  in the direction of the arrow.
• Position the engine (1)  with the special tool 2 455 010 in the direction of the arrow on the special tool 2 413 082  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Lock the holder (1)  in the direction of the arrow.
• Tighten nuts (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.