Installing the idler pulley

• Insert and install the idler pulley (2)  .
• Tighten down screw (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING ALTERNATOR .
• Refer to INSTALLING THE DRIVE BELT FOR THE ALTERNATOR .
• Refer to IF INSTALLED: INSTALLING THE RIGHT BRAKE AIR DUCT .
• Refer to INSTALLING THE WASHER FLUID RESERVOIR IN THE MOUNT .
• Refer to INSTALLING THE FRONT RIGHT WHEEL ARCH COVER .
• Refer to INSTALLING THE FRONT RIGHT WHEEL .
• Refer to INSTALLING THE SERVOMOTOR FOR THE ECCENTRIC SHAFT .
• Refer to INSTALLING THE INTAKE PLENUM .
• Refer to INSTALLING THE TANK VENT VALVE .
• Refer to INSTALLING FRONT CROSS CONNECTION .
• Refer to INSTALLING INTAKE SILENCER HOUSING .
• Refer to INSTALLING THE INTAKE MANIFOLD FOR THE INTAKE FILTER HOUSING .
• Refer to INSTALLING ACOUSTIC COVER .
• Refer to CONNECTING THE BATTERY EARTH LEAD .