1141 Oil Pump (X2 2018-2023)
1141 TIGHTENING TORQUE OVERVIEW
| Hydraulic valve to crankcase | ||
| M6x18 | Tightening torque | 8 Nm |
| Hydraulic valve to crankcase | ||
| M6 x 18 | Tightening torque | 8 Nm |
| Oil vacuum pump to crankcase | ||
| M8 Replace screw. |
1. Joining torque | 15 Nm |
| 2. Angle of rotation | 45° | |
| Sprocket wheel at the oil vacuum pump | ||
| M8 IMPORTANT: left-hand thread Replace screw. |
1. Joining torque | 5 Nm |
| 2. Angle of rotation | 90° | |