1113 Oil Pan (X2 2018-2023)
1113 TIGHTENING TORQUE OVERVIEW
| Holder to front axle support | ||
| M12 | Tightening torque | 100 Nm |
| Holder to oil sump | ||
| M12 | Tightening torque | 100 Nm |
| Oil deflector to crankcase | ||
| M8 x 35 Replace screws |
1. Joining torque | 15 Nm |
| 2. Angle of rotation | 45° | |
| Oil drain plug on oil sump | ||
| M12x1.5 Replace the sealing ring. |
Tightening torque | 25 Nm |
| Oil sump to crankcase | ||
| M8x30 | Tightening torque | 24 Nm |
| M8x110 | Tightening torque | 24 Nm |
| Transmission to oil sump (manual transmission and automatic transmission) | ||
| M8 x 50 | Tightening torque | 19 Nm |