Installing the lower section of the rear spoiler

• Position the lower section of the rear spoiler (2) at the clips (3) and clip in.
• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Lower section of rear spoiler to tailgate
  Fillister head bolt	Tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect the quick connector of the water pipe to the washer jet.
• Connect the connector to the additional brake light.
• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Lower section of rear spoiler to tailgate
  Fillister head bolt	Tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten screws (1) on left and right.
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Lower section of rear spoiler to lateral tailgate
  Oval-head screw	Tightening torque	2.6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to ATTACHING REAR SPOILER .
• Refer to INSTALLING THE TRIM FOR THE TOP REAR WINDOW FRAME .