Removing sound insulation on front door
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING COVER ON DOOR HANDLE .
- Refer to REMOVING FRONT DOOR TRIM PANEL .
NOTE:
TECHNICAL INFORMATION
Notes on the sound insulation must be strictly observed for these repair instructions.
For additional information see: NOTES FOR BONDING SOUND INSULATION (SI), DOORS .
Notes on the sound insulation must be strictly observed for these repair instructions.
For additional information see: NOTES FOR BONDING SOUND INSULATION (SI), DOORS .
- Position of sealing bead (1)
- Pay attention to the cable (2) when removing the sound insulation (3).
- When cutting through the sealing bead (1) make sure not to damage the sound insulation (2) and any potentially routed cables.
- Use a suitable, sharp cutting tool (3) to cut through the sealing bead (1) of the sound insulation (2) in the corresponding area.