Installing the luggage compartment wheel arch trim panel on the right

• Push the luggage compartment wheel arch trim panel (1) at the bottom in the direction of the arrow and thread it into the guides (2) and under the C-pillar trim panel at the bottom.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the lashing points (3) and tighten the screws (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Lashing point in trunk
  Bolt M8 x 22	Tightening torque	21 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip in the covers (1).
• Install the storage compartment (1) in the luggage compartment wheel arch trim panel in the direction of the arrow.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip the storage net (1) into the detent (2) in the direction of the arrow.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE TRUNK COMPARTMENT LIGHT .
• Refer to INSTALLING THE MOUNTING OF THE 12-V SOCKET IN THE REAR .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .
• Refer to INSTALLING HOOK AND LOOP TAPE FOR THE VEHICLE TOOL KIT .
• Refer to INSTALLING TOOLKITS .
• Refer to INSTALLING THE EMERGENCY WHEEL .
• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT REMOVABLE PANEL .
• Refer to INSTALLING TRIM PANEL FOR STORAGE SHELF (PARCEL SHELF) .