Installing rear door trim panel

• Check the clips (1) and the stop pad (2), they must not be damaged or missing, replace if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install the door trim panel and connect all plug connections.
• Attach the Bowden cable (1) on the door lock (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Engage the door trim panel (1) in the clamps at the top.
• Position the door trim panel (1) correctly and clip it into the clips (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Door trim panel to door
  Screw TS5x20	Tightening torque	2.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE COVER ON THE DOOR HANDLE .