Install right glove compartment

• Install the glove compartment (2) and connect and lock the associated connector.
• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Glove box to instrument panel
  Screw	Tightening torque	1.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten screw (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Glove box to instrument panel
  Screw	Tightening torque	1.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: TECHNICAL INFORMATION 
  Detents, guides and mounting elements must not be damaged or missing.
• Install the trim (1) and lock it at the clamps (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING KNEE AIRBAG .
• Refer to INSTALLING THE SIDE PANEL ON INSTRUMENT PANEL ON THE RIGHT .
• Refer to INSTALLING THE BOTTOM RIGHT INSTRUMENT PANEL TRIM .