Remove front bumper cover

Preliminary work 

• Refer to REMOVING THE HOOD SEAL AT THE SIDE ON THE LEFT AND RIGHT .
• Refer to REMOVING THE SEAL FOR THE FRONT CENTER HOOD .
• Refer to PARTIALLY REMOVING THE WHEEL ARCH TRIM ON THE FRONT LEFT AND RIGHT .
• Refer to PARTIALLY REMOVING THE WHEEL ARCH COVER ON THE FRONT LEFT AND RIGHT .
• Refer to REMOVING TEMPERATURE SENSOR .

• Loosen screws (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: Description is for left component only. Procedure on the right side is identical.
• Loosen screws (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1).
• Loosen screws (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Pull the bumper cover slightly forward with the help of another person.
• Unlock and disconnect the plug connections (1) on the front fog lamp.
• Remove front bumper covering.

  Courtesy of BMW OF NORTH AMERICA, INC.