Remove hydraulic unit

Preliminary work 

• Refer to REMOVING REAR HOOD SEAL .
• Refer to REMOVING THE GUTTER STRIP ON THE WINDSCREEN ON THE LEFT AND RIGHT .
• Refer to REMOVING FRONT WINDSHIELD PANEL COVER .
• Refer to REMOVING LEFT AND RIGHT WIPER ARM .
• Refer to REMOVING THE REAR COWL PANEL .
• Refer to INSTALLING BRAKE PEDAL TENSIONER .

• Disconnect plug connection (1)  .
  NOTE: TECHNICAL INFORMATION 
  Do not interchange brake lines. If necessary, mark the brake lines before disassembly.
  Note various equipment specifications with different line seizure.
  Do not bend brake lines.
  Close off connecting bores with seal plugs.

  Courtesy of BMW OF NORTH AMERICA, INC.

• (2)  Unfasten brake lines.
• Release the screw (3)  and remove the hydraulic unit (4)  .